Tall, slim and elegant, the Vintage Classic VIII builds on the SM version with a larger floorstanding cabinet for a fuller, richer and more engaging sound. True to the Vintage Classic Series, the VIII is built within a rectangular cabinet with rich walnut veneer panels and striking baffle detail, including anodised gold trim and analogue control knobs set on a dedicated panel detailing frequency response graphs. Using the 200mm (8”) Vintage Classic IsoFlare with FyneFlute roll surround and proven 25mm magnesium dome compression tweeter, this sumptuously retro design integrates a smaller form factor BassTrax porting system to deliver phenomenal bass from the relatively compact cabinet. Finished with the Vintage Classic woven cloth grille, the VIII will integrate seamlessly into any room.
Product specificationÂ
| System Type | 2 way, downwards firing port, twin cavity, BassTrax Tractrix diffuser |
| Recommended amplifier power (Watt RMS) | 30 - 200 |
| Peak power handling (Watt) | 400 |
| Continuous power handling (Watt RMS) | 100 |
| Sensitivity (2.83 Volt @ 1m) | 91dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 30Hz - 34kHz |
| Drive unit complement | 1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, ferrite magnet system |
| Crossover frequency | 1.8kHz |
| Crossover type | Bi-wired passive low loss, 2nd order low pass, 1st order high pass |
| System adjustments | High frequency energy (1.8kHz - 26kHz) +/- 3dB, Presence (2.5kHz - 5.0kHz) +/- 3dB |
| Dimensions - HxWxD | 873 x 380 x 300mm (34.4 x 15.0 x 11.8") |
| Finishes | Walnut |
| Cabinet Construction | High density fibreboard, walnut veneered with extensive internal bracing |
